BIERKRONE Keg Coupler, D-type for American Sankey beer keg

BIERKRONE Keg Coupler, D-type for American Sankey beer keg connector, commercial grade, for draft beer 2 hose clamps included (Tailpiece Barbs)

• 🍺Stainless Steel: This D-Type keg coupler features both, a stainless steel probe and body. Hence, it is more hygienic, safer, and sturdier than kegs made from chrome-plated brass or even nickel-coated alloy. Thanks to the upscale materials, the connector won’t rust, flake, or spall, even after using it multiple times. Your beer will always taste fresh, zippy, and non-metallic.
• 🍺Neither leakage nor backflow: Both, inlet and outlet of the keg coupler are equipped with proper food-grade gaskets which prevent beer and gas leakage. On top of that, the gas inlet boasts a one-way check valve so that gas won’t backflow and beer won’t wrongly flow up your gas line. Also, a check ball inside the outlet will stop beer backflow. Like that, not one drop of your favorite beverage will be wasted.
• 🍺Safe to use: This keg coupler comes with a built-in pressure relief valve that releases gas automatically once the pressure is over 60 PSI. To better control foam, flow, beer dispense, and pumping speed, you can also release some pressure manually. Simply pull out the valve ring and fresh draft beer will flow as you wish.
• 🍺Easy installation: Simply screw this twist-on coupler onto the keg and connect the in- and outlet with the gas and beer line, using the included worm-gear clamps. After that, pull out the black lever handle and push it down to open the keg valve. You are now ready to pour freshly tapped beer! Of course, dismantling this American Sankey connector for easy cleaning is a breeze too.
• 🍺Where to use it: This connector is mostly used for commercial Sanke kegerators in bars, restaurants, pubs, etc. On the other hand, it is also great for private events like weddings, festivals, or BBQ parties with multiple beer lovers. Use it to dispense lager, kombucha, soda water, or other carbonated beverages, and keep fizzy drinks coming.

Advantages of this Keg Coupler

– Standard Size; suitable for most American D-System kegs and kegerators
– Body, probe, tailpieces, nuts, etc. are all made from stainless steel
– Stable, rust-free, durable material
– Silicone gaskets prevent beer and gas from leaking
– Check valve and check ball stop gas and beer backflow
– With a built-in pressure relief valve to avoid pressure getting too high
– Easy to assemble, disassemble, and clean
– Including 2 worm-gear clamps; attach gas and beer hoses tightly and leakage-free
– Perfect for restaurants, pubs, bars, festivals, weddings, BBQ parties, etc.

How to Install and Use this Keg Coupler?

First, assemble all parts (see instruction manual or watch video for detailed assembly process).
For the next step, make sure the lever handle is not engaged. Twist the coupler into place by screwing it clockwise onto the keg valve. Now connect the gas and beer hoses with the tailpiece barbs, tightening them with the included worm-gear clamps.
After that, pull out the lever handle and push it down. This will allow beer to flow out of the keg. If needed, adjust the pressure with the built-in pressure relief valve by pulling out the ring. Pull the lever handle up to stop the beer and gas flow.
Please don’t forget to clean the coupler after usage, to avoid beer residue build-up, which may cause probe blockage or hygiene issues. To clean it thoroughly, first, disassemble all parts and put them into a container with warm water and a cleaning solution. Then scrub them with a small brush, making sure to get inside the body and probe. Finally, rinse everything off with tap water.