Jfsotls Never Fade Car LED Door Logo Projector Ghost Shadow Light, LED Welcome Courtesy Step Light Puddle Light Compatible for Foresters Outback Legacy XV Accessories

• Never fade high brightness logo slides 2pcs set car door ghost shadow projector logo light for Forester 2013-2022, Outback 2012-2022,Legacy 2010-2022,XV 2012-2022,Using high Quality glass projection chip, the brightest and clearest projection, never fade.
• Easy installation plug and play,no need drill any hole,no need damage your car door,just replacement your old door light,it is exact fitable light and you can just take out the old light on your car then insert it wihout change wires or drill hole.
• Open the door, The door lights will illuminate the floor, The White Blue Logo will immediately be projected on the ground, providing illumination for entering and exiting the car. Lights automatically turn off when the door is closed
• The only design on the market, when the door is opened for 2-3 minutes, it will automatically disconnect the power to protect the wick from overheating to extend the life of the project
• We have configured 2 Car dedicated adapter cables for the door light. If your original door light plug is too large to be inserted, please use the adapter cable to connect and install it.

Never Fade White Blue Logo Door Light For Forester/Outback/Legacy/XV
Compatibility:
For Forester 2013-2022
For Outback 2012-2022
For Legacy 2010-2022
For XV 2012-2022
Note: We have configured 2 Car dedicated adapter cables for the door light. If your original door light plug is too large to be inserted, please use the adapter cable to connect and install it.
Specification:
Input Power: 5w (each LED bulb)
Voltage: DC 6/32v
Working Temperature:-40℃-105℃
LED Color Temperature: 5500K
Lower Power Consumption
Advantages: It uses the latest production technology, it has the function of timed power off, extending the project’s use time.
(It lasts longer than normal projects)
Ordinary items: If the puddle lamp is lit for a long time, the film will be burned quickly, thus shortening the project’s use time
My project: If you use my project, when it is lit for 2-3 minutes, it will automatically disconnect the power to extend the life of the project.
How to replace car door light(Installation Instructions)
1. Use A Flathead Screwdriver Or Installation Tool To Remove And Disconnect Original Door Lights;
2. Plug In new Door Lights With Correspondent Connector;
3. Put new Door Lights To The Spot Where Your Original Step Lights Were.
4. Done! Logo Should Be Projecting On To The Ground.
Package Included
2 pcs (1 Pair) CAR DOOR LED LIGHT (One Left & One Right)