FusedLine Grinder Setting Dial for Eureka Mignon | Ergonomic

FusedLine Grinder Setting Dial for Eureka Mignon | Ergonomic Grind Adjustment Knob | Effortlessly Switch Between Espresso and Filter Coffee

• Compatibile with Eureka Mignon Specialita, Silenzio, Perfetto, Design, Turbo, Manuale, Classico, Bravo, Filtro, Filtro Silent, Crono, Brew Pro, Casa, Facile, Instantaneo, Notte, Zero, Zero Brew, Libra, Oro XL, Oro Single Dose, Oro Single Dose Brew, Oro Dolce Vita, and Oro Stark. In general, this device is compatible with all Eureka Mignon and Eureka Oro Mignon grinders that have the adjustment knob on the right-hand side.
• This precision tool is designed specifically for the Eureka Mignon series grinders and is durable, reliable, and easy to use. It solves the problem of losing your reference point when switching between grind sizes. Now, you can easily adjust the grind size between espresso, pour-over, and French press grind sizes, and the numbered dial ensures that you can always return to your preferred setting with ease. No more wasting precious coffee to dial in the grind again!
• The gear ratio used in the FusedLine Grinder Setting Dial is 3:1, meaning that three full rotations of the knob equates to one full rotation through all 100 increments on the dial. This unique feature allows you to make extremely fine adjustments and maximize the performance of your grinder.
• Installing the FusedLine Grinder Setting Dial for Eureka Mignon is a breeze – it's a non-invasive tool that won't damage your grinder and you can remove it at any time. To install, watch the listing video and/or see ther steps below.
• Support small business! FusedLine is a family-run company based in Seattle, WA!

***Grinder not included! To Install:

1. Emptying and remove the hopper from your grinder. Loosen the screw on the back of the grinder inlet, do not fully remove it.

2. Clean any grounds from the grinder inlet and off the top of the machine.

3. Unscrew the stock adjustment knob by twisting it counterclockwise until it completely unscrews and can be removed from the machine.

4. Twist on the new grind adjustment knob and tighten it until the knob bottoms out and you feel resistance.

5. Find the ‘zero’ point on the grinder (***read all additional details below***) with the new knob by turning on your grinder and slowly twisting the knob towards the FINE setting. When the burrs make first contact and begin to “chatter,” immediately stop tightening the dial and back it off 1/16th of a turn or until the chatter stops. This is your ‘zero’ point.

6. On the dial, rotate the gear with the numbers so that ‘0’ is directly under the arrow.

7. Position the dial over the grinder inlet with the arrow pointing towards you and press down until the dial contacts the top of the machine.

8. Insert your hopper back into the grinder inlet on the top of the machine.

9. Secure the hopper by tilting the back of the dial upwards and off the machine so that the hopper installation screw is visible.

10. Press the dial back down onto the top of the machine.

***It is important that you move very slowly when finding zero. You want to stop tightening the burrs as soon as they make contact. This will not hurt your burrs if they only touch momentarily. The surface between them is flat, so the sharpened burrs do not come into contact.

Congratulations! You have successfully installed the FusedLine Grinder Setting Dial and Adjustment Knob. Enjoy the ability to effortlessly dial in your grind settings and get the perfect grind every time!