hardware 3/8'' X 8m Immersion Chiller,Stainless

hardware 3/8'' X 8m Immersion Chiller,Stainless Steel Cooling Coil Tube Wort Chiller Super Effective Heat Exchanger Homebrew Beer Cooler

• Immersion ChillerOverall Height: 35.5cm;Coil Diameter: 3/8 inch (9.52mm);Tube Thickness: 0.5mm;Coil Length: 8M;Coil Height: 10cm;Coil Width: 23.5cm
• There is a minimal risk of contamination as brewing wort is not cycled through a separate container.
• Immersion chiller coils are cheap to purchase and economical to operate.
• Clean up is easy too. You only need to wash the outside.
• As the cool water flows through the coil, it absorbs heat from the wort mix and therefore reduces its temperature.

Specification:
Material: 304 Stainless Steel
Overall Height: 35.5cm
Coil Diameter: 3/8 inch (9.52mm)
Tube Thickness: 0.5mm
Coil Length: 8M
Coil Height: 10cm
Coil Width: 23.5cm
Package Include:
1 Pc x Immersion Chiller
1 Pc x Water Adaptor
1 Pc x 2m Silicone tubing

What Is an Immersion Chiller?
● Brewery cooling device that consists of a length of coiled tubing.
● You drop the apparatus directly into the hot wort, and then connect with cooling fluid(usually is tap water from faucet)