OWC 2.0TB SSD Upgrade Bundle for 2012-2019 27″ iMacs with a Factory-Installed HDD or Fusion Drive, 2 TB 6G SSD, Drive Converter Bracket, in-line Digital Thermal Sensor Cable, Installation Tools

• Complete DIY kit for upgrading your 2012-2019 27" iMac's hard drive with a high-performance OWC 6G Solid State Drive; No software hacks required
• Sequential Read (Max): Up to 540 MB/s; Sequential Write (Max): Up to 500 MB/s
• Capacity: 2000GB Useable Capacity, Total Flash Memory Components: 2048GB, Form Factor: 2.5-inch 7mm; Storage Interface: SATA 6.0 Gb/s; Sequential Read (Max): Up to 525 MB/s; Sequential Write (Max): Up to 516 MB/s; Sequential Read (Average): 514 MB/s; Sequential Write (Average) 513 MB/s
• Compatible with 2012-2019 27-inch iMac. Note: Mercury Electra 6G SSDs can only be installed in 27-inch iMac models that came with a factory-installed HDD or Fusion drive. Solid-State Drive (SSD) only machines can be upgraded with an Aura Pro X2 SSD (Late 2013 – 2019) or Aura 6G SSD (Late 2012).
• Backed by free DIY install videos and expert support; Includes: (1) OWC Mercury 6G SSD, (1) AdaptaDrive 2.5" to 3.5" Drive Converter Bracket, (1) In-line digital thermal sensor cable, (2) 2.25" suction cup, (1) Torx T10s driver, (1) Torx T8s driver, (1) Adhesive strip set, (1) Nylon pry tool (spudger), (1) Screen removal tool, (1) Microfiber scratch-free cloth, AdaptaDrive Assembly Manual & User Guide, 3 Year OWC Limited Warranty

---

Product Description

Complete DIY kit for upgrading your late 2012 or later 27″ iMac’s hard drive

Mercury Electra SSD and iMac HDD Kit

Experience the extreme performance of an OWC SSD upgrade with this easy DIY SSD and hard drive replacement kit. Add an SSD to your hard drive equipped iMac to experience faster booting, near instant application launches and data transfer speeds up over 500 MB/s.

Important Installation Note:

Leaving original adhesive or other foreign material on the display glass or chassis may result in a poor bond, causing the glass to disconnect from the chassis.

Remove any adhesive residue or other foreign material from the display glass and chassis before re-assembling the iMac.

Avoid adjusting the screen during re-assembly. Adjusting the screen during re-assembly may result in a poor bond, causing the glass to disconnect from the chassis.

Allow adhesive to cure for 20 minutes before standing the iMac upright.

Maintains highest performance while offering ultimate convenience

The NewerTech AdaptaDrive has been benchmark test proven to deliver the same data transfer rates as is experienced when a drive is connected directly to the SATA data bus. The AdaptaDrive doesn’t create a bottleneck or any performance throttling…it delivers pure data pass-through performance and drive use convenience from any 2.5″ SATA 1.5Gb/s, 3Gb/s, or 6Gb/s hard drive or SSD.