ZOZOMOTORS 3/8″ Side Post Remote Battery Disconnect Switch 12V Universal Fit Battery Kill Switch for Car Truck UTV ATV Marine Anti Theft Battery Cut/Shut Off Switch, 200/1000 AMP Heavy Duty, On/Off

• 100M REMOTE CONTROL BATTERY DISCONNECT SWITCH. 100M remote battery kill switch used for any 12V equipment that not in use, prevent battery from parasitic drain or as a theft deterrent. Convenient FOB remote control, no need to open the hood to disconnect battery, just a quick button push. The remote is preprogrammed and ready to go out of the box
• HEAVY DUTY / HIGH CURRENT DEVICE. High current rated to 200A Continuous / 1000A Crank Amps. Enough crank amps to start your car in cold weather. This is a high quality solid state relay with a remote control receiver circuit built into it. ZOZOMOTORS uses high quality & durable parts only. The current draw of this switch (the remote receiver) is 0.001 – 0.005 AMPS while connected. it's very minor
• UNIVERSAL FIT 12V SYSTEM. Copper bridges with 3/8" diameter holes. Relay switch stud terminal size: 1/4" x 2. Recommend install on the NEGATIVE SIDE of the battery. Installation on the positive side is also allowed. This switch can be used to disconnect any 12V system including cars, trucks, RVs, boats, and other equipment
• EASY TO INSTALL, WIRING DIAGRAM IS PROVIDED. You can check the clearance around the negative pole of your battery (refer to product image 3). An easy-to-follow wiring diagram is included in the package. The red and black wires power the remote receiver in the relay and should always go to the positive and negative battery poles respectively. One side stud terminal of the relay goes to the negative pole on the battery, and the other gets the negative wire from the car
• REMINDER. This switch is to disconnect power directly from the battery, electronics that store data, like your radio, will lose memory. California users must keep the battery connected without activating the switch for several days before a smog test

---

Product Description

ZOZOMOTORS Heavy Duty Remote Battery Disconnect Switch

Specifications:

• Condition: 100% Brand New
• Voltage: Universal, works with any 12V system
• Continuous Amps: 200A
• Cranking Amps: 1000A (enough cranking amps to start your car in cold weather)
• Current draw of this switch (the remote receiver): 0.001 – 0.005A
• How to use: Wiring diagram included in package, or as per product image 3

Recommend INSTALL ON THE NEGATIVE SIDE of the battery. Can be installed on the positive side if needed

1. One stud terminal of the relay is connected to the negative post of the battery, and the other gets the negative ground wire from the car

2. The red and black wires power the remote receiver in the relay and should always go to the positive and negative battery posts respectively

Red Wire – to Positive Post

Black Wire – to Negative Posts the negative wire from the car

It’s not necessary to use 2 AWG wire to install this switch. The lugs included in this kit are for 2 AWG wires because of the maximum current flow the relay switch can handle. We suggest looking for the number that comes on your wire and using a wire gauge matches that numbers

Package Included:

1x Installation Instructions with Wiring Diagram

1x Relay Switch with Wire Harness

1x Remote Switch

2x Relay Copper Bridges

2x Long Bolts 3/8″-16

2x Copper Lugs

2x Relay Mount Screws