Qagea 42002-0007s Control Board Kit (461105) with 472610Z

Qagea 42002-0007s Control Board Kit (461105) with 472610Z Switch Membrane Pad Fit for Mastertemp & Sta-Rite Max-E-Therm Pentair Pool and Spa Heater – Compatible with All NA & LP Series Pool/Spa Heater

• 【Compatibility】 This board fits MasterTemp heaters: Mastertemp 200, Mastertemp 250, Mastertemp 300, Mastertemp 400. Sta-Rite Max-E-Therm heaters: SR200NA, SR333NA, SR400NA, SR200HD, SR333HD, SR400HD, 460805. And all NA and LP series pool/spa heater electrical systems.
• 【Replacement OEM Number】 Control Board OEM Number: 42002-0007S 461105. Switch Membrane Pad OEM Number: 472610Z.
• 【Installation】 First, turn off all power and open the top of the heater, remove the film pads from the old board and remove the wire connectors to the old board. Unscrew the 4 screws that hold the board in place. Remove old board completely. Screw the new board back in and insert the membrane pads into the ribbon cable connections. Reconnect all wires and close out the master temp or max e therm heater.
• 【Application】 The control board fit for Mastertemp & Sta-Rite Max-E-Therm Pentair Pool and Spa Heater. This 42002-0007S control board kit compatible with NA and LP Series Pool and Spa Heater Electrical Systems.
• 【Warranty】 42002-0007s control board is warranted for 3 years! If you have any questions or needs, please feel free to contact Qagea, we will be happy to help you solve the problem. If there is a problem with the product, we will offer you a full refund.

This 42002-0007S control board fit for Mastertemp & Sta-Rite Max-E-Therm Pentair Pool and Spa Heater.

This 42002-0007S control board kit compatible with NA and LP Series Pool and Spa Heater Electrical Systems.

This board fit for：

MasterTemp heaters: Mastertemp 200, Mastertemp 250, Mastertemp 300, Mastertemp 400

Sta-Rite Max-E-Therm heaters: SR200NA, SR333NA, SR400NA, SR200HD, SR333HD, SR400HD, 460805

Replacement OEM Number：

Control Board OEM Number: 42002-0007S 461105

Switch Membrane Pad OEM Number: 472610Z

Installation

First, turn off all power and open the top of the heater, remove the film pads from the old board and remove the wire connectors to the old board. Unscrew the 4 screws that hold the board in place. Remove old board completely. Screw the new board back in and insert the membrane pads into the ribbon cable connections. Reconnect all wires and close out the main thermometer or max e therm heater.

Warranty

42002-0007s control board is warranted for 3 years! If you have any questions or needs, please feel free to contact Qagea, we will be happy to help you solve the problem. If there is a problem with the product, we will offer you a full refund.