Sunluway 6575 Universal Hub Grappler Kit for Vehicle Wheel

Sunluway 6575 Universal Hub Grappler Kit for Vehicle Wheel Hub and Bearing Removal & Installation, Hub Bearing Removal Tool

  • 【UNIVERSAL FITS】 6 new adapters increases application coverage up to 2009 model year. Also includes tie rod/ball joint tool and 2 Ford axle installers.
  • 【FUNCTION】This Hub Grappler Kit, replaces OTC 6575, which is the complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle. It can eliminate unnecessary alignments or the use of a shop press, saving you time and energy!!
  • 【PERFORMANCE】Jaws are designed and sized to properly fit hub applications and can be quickly located on the puller Bar without the use of fasteners
  • 【EASY TO USE】 With 3/4" custom drive screw coupled with the special equalizer washer provides smooth operation. Easy to remove and install the front hub and bearing .Comes with Operation Manual.
  • 【A MUST HAVE】The Hub Grappler Puller is specifically designed to apply maximum force with minimal effort from an impact gun, which can minimize your serving time.
  • 【CONVENIENT】With Heavy-duty plastic blow-molded carrying case for easy transportation, convenience, storage, and simple organization, keeping all the tools in order.
  • 【SATISFACTION GUARANTEE】 If you're not 100% satisfied with this tool, simply return it for a full refund in 30 days, guaranteering 12 months warranty.

SKU: B0CB7DCFPR

Product Description

16575 Hub Grappler Kit 6575 Hub Grappler6575 Hub Grappler Kit

FRONT HUB REMOVAL

  • Use the wrench to hold the forcing screw nut and turn the forcing screw to press out the hub assembly

BEARING REMOVAL

  • 1. Remove the snap ring from the outboard side of the knuckle
  • 2.Use a wrench to hold the forcing screw nut and turn the forcing screw to press out the worn bearing

NEW BEARING INSTALLATION

  • NOTE: The bearing installed must be assembled with the flat side toward the bearing and the small diameter pilot away from the bearing.
  • 1.Lightly lubricate the new bearing, and position it for installation
  • 2.Use the wrench to hold the forcing screw nut and turn the forcing screw to press the bearing into the spindle assembly until it bottoms
  • 3.Install the snap ring in the outboard side of the knuckle.

Tags: