Wine Bottle Cap Lids Heat-Shrinking Machine PVC/PP/PE/POF

Wine Bottle Cap Lids Heat-Shrinking Machine PVC/PP/PE/POF Capsule Shrinker Digital Display Capsule Shrinking Machine for Diameter less than 2.75in Bottles, 0-400℃ Adjustable,110V 1000W

• 【Size & Material】Size(L*W*H): 41*16*23cm/16.14*6.3*9.05inch. Power cord length: 1.5m/4.9ft. Mainly made of stainless steel. Does not use any paint treatment. After cutting, welding and polishing treatment, durable and will not rust. (The operation method and how to set the temperature can refer to the )
• 【Temperature Adjustable】The body has a digital display, the temperature can be displayed in real time. Upper row temperature setting, lower row heating temperature display. Temperature of shrink film material: 120-150℃/248-302℉. Adjustable working temperature: 0-400℃/32-752℉, suitable for different thickness of heat shrink caps. You can set the shrinking temperature according to your material, and view the digitals at any time.
• 【Fast working】Voltage: 110V; Power: 1000W; Frequency: 60Hz. With spiral heating wire and digital temperature controller, it can keep the temperature inside the hole uniformly and quickly, it only takes 2-3 seconds to complete the heat shrinking of a bottle (depending on the quality of the cover paper). The working speed is about 700 bottles/hour.
• 【Safe to use】It is equipped with a fu-se to ensure safe operation. The machine is designed with a V-shaped slot so that round bottles will not slide. There are six small round feet at the bottom as a support to ensure the stability of the machine during operation and avoid scratching the table. The package also includes a small knob with FU-SE and arrow signs and two additional fu-ses for replacement.
• 【Applicable Scope】Heating hole diameter: 70mm/2.75inch, this heat shrink machine is suitable for PP/PVC/PE/POF heat shrinkable caps and bottles with bottle mouth diameter less than 2.75 inch, such as kinds of wine bottles, soy sauce and vinegar bottles, oil bottles, etc. The machine is easy to operate and simple to use, suitable for home, various small wine factories and food factories.

Product Parameters

Model: SM-1

Material: Stainless Steel

Treatment: Cutting, Welding, Polishing

Shape: Irregular

How it Works: Manual

Display: LED Indicator Included

Display Mode: Upper Row Temperature Setting, Lower Row Heating Temperature Display

Applicable Material: PVC/PP/PE/POF

Working Temperature: 0-400℃/32-752℉ Adjustable

Shrink Film Material Temperature: 120-150℃/248-302℉

Ironing Time: 2-3s (depending on the quality of the cover paper)

Power Source: AC

Plug: US Standard

Voltage: 110V

Power: 1000W

Frequency: 60Hz

Speed: 700 bottles/ hr

Power Cable Length: 1.5m/4.9ft

Heating Hole Diameter: 70mm/2.75in

Product Size(L*W*H): 41*16*23cm/16.14*6.3*9.05in

Package Size: 43*20*23cm/16.9*7.87*9.05in

Net Weight: 3.3kg/7.27lbs

Gross Weight: 3.5kg/7.7lbs

Application: It is widely used on PP/PVC/PE/POF heat-shrinkable capsules of bottles. And the capsule diameter should be less than 70mm/2.75 in.

Package Included

1* Heat Shrinking Machine

1* Power Cable

2* Fu-ses

How to Operate:

1.Put the PVC heat shrinkable cap on the bottle mouth and set the temperature.

2.Push the bottle mouth toward the heating hole and push it into the heating chamber along the V-shaped slot of the body.

3.Remove the bottle after holding the bottle in the heating chamber for 2-3 seconds at the set temperature.

4.The PVC heat-shrinkable cap will be heat-shrink and tightly wrapped around the bottle mouth for protection and decoration.

How to Set Temperature

1.Press SET to start the setting.

2.Press the left arrow to adjust the position of the digits to be set (single digit, ten-digit, hundred-digit).

3.Press the up/ down arrows to adjust the desired number.

4.