IC ICLOVER Pool Alarm with Remote Receiver, Underwater
IC ICLOVER Pool Alarm with Remote Receiver, Underwater Immersion Drown Monitor System, Poolside Alarms for Inground Pools, Secure with Screws, Kids Toddler Pets Swimming Pool Safety Guard Protection
- ‼️【NEW IMPORTANT UPDATE】‼️The pool alarm can be installed in two ways: by punching holes in the edge of the pool or by sticking it directly to the edge of the pool with double-sided tape. The expansion screw package and double-sided tape are included.
- 【Poolside Motion Sensor & Remote Receiver】 The poolside motion sensor helps you detect the fluctuation of water surface then the remote receiver instantly gives dangerous feedback when something dangerous happens in your pool. Alarms and reminds you to implement rescue at a short response time.
- 【Flashing Receiver Alarm】 The receiver alarm will give out sounds with LED flashing at the same time when children or pets fall into the pool or pond. The 85 dB alarm will be triggered when a over 13-lb-weight object is detected. Please test the alarm after installation!
- 【Adaptation Pool Type】This poolside alarm is suitable for both inground pool and above ground pool.The poolside unit is suggested to be installed in the pool less than or equal to 16x32sq.ft. And be sure it is installed at the proper place. The tube should be submerged under the water surface about 3.9".
- ‼️【Not A Life-saving Device】‼️ ATTENTION! The IC ICLOVER Pool Alarm is just a pool safety alarm system, but not a life-saving device! Any safety consideration such as adult supervision, lifeguards or fences should not be replaced!
| SKU: | B0CZ3D36RT |
| Weight: | 4.8 pounds |
| Dimensions: | 11.8 x 7.9 x 10.6 inches |
| Model: | pool alarm |
| Batteries Required: | Yes |
| Batteries Included: | No |
| Manufacture: | IC ICLOVER |
| Origin: | China |
Product Description
Immerse Yourself in Pool SafetyIC ICLOVER Pool Alarm
Pool Alarm is intended to be an additional layer of security to protect your loved ones.
The Pool Alarm is not intended as a life-saving device and is not intended to replace any other safety considerations such as adult supervision, lifeguards, fences, gates, pool covers, locks, etc.
The Pool Alarm may not detect gradual entry into the pool.
This model has a transmitter and receiver. It is intended to alert you at the pool of any intrusion and will transmit to a receiver located nearby.
| Max Detection Range: | 16x32sq.ft |
| Max Connection Distance | 300ft |
| Min Detection Weight | 13lb |
| Alarm Sound Level | 85db |
| Powered By | 6* 1.5V Battery (Not Included) |
| Support 2 Installation Methods | Percussive drill, dia.8mm; Cross screwdriver, dia.6mm OR Apply 4 super double-sided tape; All accessories are in the package! |
ENHANCE YOUR POOL SAFETY WITH OUR POOL ALARM
Pool Alarm Receiver
- AC powered for reliability, the charger is included in the package.
- Stay connected to your pool alarm system with up to 300 feet of receiving range.
- In the event of an alarm activation, the receiver will emit an 85-decibel alert, providing ample volume to grab your attention.
How to install the main unit to the pool edge?
Two installation methods are available.
One method is drilling holes on the pool edge, then using the screw to fix the main unit.
Two method is stick to the pool edge with super double-sided tapes.
When should i replace the battery? /Why the main unit always makes a beep sound every 10S?
Lasts about 1 year and can be easily replaced with 1.5V battery.
With a low battery warning function, the main unit will beep in intervals of 10S, indicating the battery needs replacement.
What is the range of the pool alarm between the reveiver?
Pool alarm main unit can typically be 300ft from the receiver unit. Place the remote receiver within 300 feet of the main unit.
Install the home unit on the nearest wall and avoid obstacles between both units to improve range.
Alarm is not turning on when an object is dropped in the pool?
Check the submersible sensor tube into the water lever 10cm deep.
Or the weight of the object is too light (dropped object not less than 6kgs).
False alarm caused by strong wind?
When there is strong wind or heavy rain weather, please move the control button to right to switch to Mute/Swim status to avoid false alarms.
Installation Location & Quantity Required
Receiver ” data-position=”triggerHorizontal” />Manual ” data-position=”triggerHorizontal” />Receiver Charger ” data-position=”triggerHorizontal” />