Swimming Pool Heat Pump, Electric Swimming Pool Heater
Swimming Pool Heat Pump, Electric Swimming Pool Heater Built-in Circulating Water Pump Control System for Above Ground Pools, up to 2000gallons, Max Output 12000BTU/hr, Heat Exchanger,110V No Plug
- 1.Note：Needs electrician to install.Suitable for pools up to 2000 gallons the temperature ranged from 71.6 °F-122 °F .The built-in circulating water pump control system（Stop working after reaching the temperature, then every 15 minutes the circulating water pump circulates to check the water temperature and turns on after it is lower than the set temperature.）,no need to run your pool pump all the time, does not require additional installation of circulating water pump switch
- 2.Material: 304 Stainless Steell;Voltage: 110V/50-60Hz;Power: 3KW;Current: 28A;Phase Parameters: Single Phase;NOTE:One interface is 50mm, the other port is 32mm, please note the size of the pipe before use.
- 3.Using a waterproof touch digital display control panel, the temperature setting and display are more accurate and clear.
- 4.Use the flow temperature sensor technology to replace the pressure switch, the machine installation requirements are reduced, and the use is more convenient
- 5.The intelligent self-inspection system comprehensively monitors the operating status of the system, and quickly makes corresponding fault judgments and displays to avoid damage to components and facilitate problem solving and maintenance.
| SKU: | B0D1YCJYBT |
| Weight: | 6.23 pounds |
| Dimensions: | 5 x 5 x 5 inches |
| Model: | 3KW |
| Manufacture: | AYCHLG |
| Origin: | China |
Product Description
