Electric Grain Grinder, Peanut Butter Maker, Sesame Sauce Grinder, for Home/Commercial 33lb/h 1100W

• Grinding Assistant: The 1100W pure copper motor, 2850r/min, and the white jade just grinding wheel used can grind the raw materials finely, so you can enjoy delicious soy milk, sesame milk, etc. Compared to the traditional peanut butter machine, it keeps a low noise when operating, so you do not need to wear additional ear muffs or worry about the impact on your neighbors.
• Large Capacity: It can grind up to 33.07 lbs of raw materials per hour, so whether you are using it for home or commercial use, it can meet your large amount of grinding needs.
• High-safety: The heat dissipation holes can speed up the heat dissipation of the internal motor, thus ensuring that the machine can work stably for a long time without overheating. What's more, it is overload protected, so you can use it with confidence.
• Build to Last: Its stainless steel housing and aluminum crushing bin make it solid, anti-corrosion, anti-rust performance, and have a long service life.
• Easy to Clean: Because of its smooth surface, detachable design, and simple structure, you can clean it easily with a rag.

Specification

Type: HR-100Y

Material: Aluminum Alloy, Stainless Steel

Color: Silver

Assembly Required: No

Mount Type: Freestanding

Number of Pieces: 1

Plug Standard: US Standard

Drive Mode: Electric

Motor: Pure Copper Motor

Voltage: 110V

Hz: 60Hz

Speed: 2850 r/min

Power: 1100W

Power Cord Lengh: 1.5m/4.92ft

Emery Wheel Diameter: 10cm/3.94in

Package Size: 80*38*38cm/31.5*14.96*14.96in

Product Size(D*H): 27*64cm/10.63*25.2in

Grinding Capacity: 15kg/h, 33 lbs/h

Gross Weight: 24kg/52.91 lbs

Net Weight: 23kg/50.71 lbs

Package Included

1 * Peanut Butter Machine

1 * English Manual

All Accessories for Installation

Notes

1. The materials can not be too cool, only dry materials, and sesame can not contain moisture. After switching off the machine, you need to scrape the machine lightly with a spoon! If you accidentally get water on it, you can clean it up by blowing it dry with a hair dryer before using it again!

2. Check whether the power supply voltage is consistent with the nameplate, the power socket should have a solid grounding wire. Cover tightly before use.

3. Before turning on the machine to adjust the hand wheel to the coarse direction of one turn (clockwise).

4. When the machine is powered on, check that the motor is running properly, if not, please turn off the power immediately.

5. After work, adjust the hand wheel to the coarse direction with no grinding wheel friction sound.

6. Please allow the slight color difference caused by the shooting light and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.