(New Upgraded) WYBOT A1 Cordless Robotic Pool Cleaner, Automatic Pool Vacuum with 120 Mins, Double Filters, LED Indicator, Fast Charging, Ideal for Above Ground Flat Pools – Black & Green

• Exceptional Dual Filtration System: Setting WYBOT A1 apart from the norm, our pool robot boasts a rare dual-layer filtration system – combining a 180μm filter with a cotton foam layer, enhancing filtration efficiency by 50%. Effectively captures a wide range of debris, including small leaves, sand, and so on, elevating your pool's cleanliness. Note: If the pool is dirty, clean the filter every 30 minutes to avoid clogging and damage.
• Extended 120-Minute Runtime: A1's extended working time is up to 120 minutes. This marks a remarkable 50-100% increase compared to previous models, minimizing the need for frequent recharging. Covering a maximum area of 1076 sq.ft.
• Rapid 2.5-Hour Charging: Bid farewell to the prolonged 6-7 hour charging times – now, a mere 2.5 hours is all it takes to unleash the power of a fully charged wireless pool robot. Embrace quick and efficient charging with the latest technology, transforming your pool cleaning experience.
• Edge Cleaning Function: When the cordless pool vacuum hits the wall, it will pause briefly to enhance its power for edge cleaning before resuming cleaning of the pool floor.
• 5 LED Indicator Colors: The A1 comes equipped with a dynamic LED system featuring five distinct colors for clear status updates. Green signals battery level, blue indicates power on/working, yellow warns of low battery, purple signifies the selected cleaning cycle, while red alerts to any machine errors. Experience an intuitive and user-friendly interface.

---

Product Description

2024 WYBOT NEW RELEASE – A1

Previous page

1. 
2. 
3. 
4. 

Next page1Efficient Cleaning2Edge Cleaning3Double Filtration42.5H Fast Charging

120mins Super Long Running Time

Previous page

1. 
2. 
3. 

Next page1For Flat-Bottom Pools25 LED Indicators3For Most Pool Surfaces

Brand New Product

If you receive a wet product, don't worry. It's brand new, not second-hand. We test every unit underwater before packaging to ensure it works properly

WYBOT A1

Explore More with WYBOT

Flat Bottomed Floors	Cleaning Coverage	Floor,Wall,Waterline
120 minutes	Working Time	150 minutes
2.5 Hours	Charging Time	2.5 Hours
No	Path Planning	Yes

Flat Bottomed Floors	Cleaning Coverage	Floor,Wall,Waterline
120 minutes	Working Time	150 minutes
2.5 Hours	Charging Time	2.5 Hours
No	Path Planning	Yes

Flat Bottomed Floors	Cleaning Coverage	Floor,Wall,Waterline
120 minutes	Working Time	120-150 minutes
2.5 Hours	Charging Time	3 Hours
No	Path Planning	Yes

Flat Bottomed Floors	Cleaning Coverage	Floor,Wall,Waterline
120 minutes	Working Time	180 minutes
2.5 Hours	Charging Time	2.5 Hours
No	Path Planning	Yes

Previous page

1. WYBOT S1SE
2. WYBOT C1 Pro
3. WYBOT C1
4. WYBOT S1

Next page

Learn MoreLearn MoreLearn MoreLearn More

What types of pools is WYBOT A1 suitable for?

Suitable for flat and smooth pool bottoms, not recommended for pools with a slope exceeding 15 degrees or with many wrinkles at the bottom.

What are the precautions that must be read before use?

1. Try not to use in very dirty pools; the secondary filter may clog and damage internal electronics.

2. Clean the filter every 30 minutes if the pool is dirty.

3. Always reinsert the filter before starting the machine.

Why does water appear inside the product packaging?

Each unit undergoes meticulous underwater testing before packaging to ensure optimal performance upon delivery. Minor dampness or water stains on the machine are considered normal.

What should be noted when selecting the cleaning cycle?

It's important to ensure that the A1 is fully charged before selecting the cycle.

Why does the machine need time to recalibrate when it hits the edge or reverses?

Because A1 briefly pauses to enhance edge cleaning power before resuming cleaning the pool floor.