Bushing Installation Tool Compatible with Hendrickson Turner Intraax Wide Bushing, Sliver

• This bushing installation tool is specially designed for Hendrickson Turner Intraax wide bushings. With its durable construction and high-quality materials, it is guaranteed to make the installation process a breeze
• For Hendrickson Tri-Functional Wide Beam Bushing Kits, Made to service most Hendrickson, Hendrickson Turner, Watson Chalin, and Automann bushings. Wide Bushing Tool Part Number: S21307, E9575, TRB5912-T; The S-21307 tool makes bushing alignment & replacement a simple procedure.
• Engineered using the latest technology to ensure the product lasts longer in service, with a factory-like design for effortless installation, ensuring a perfect match with your vehicle
• Must use lube on threads of tool, thrust bearing, and washer faces, must also ensure the bushing is well lubed with bushing supplied lube.
• Package: 1 Set of Bushing Installation Tool – Complete Kit. ( Includes two small packet of LUBE ) Made of high-quality components for durability, reliability, and performance

›

This S-21307 bushing installation tool is specially designed for Hendrickson Turner Intraax wide bushings.
The S-21307 is the Hendrickson bushing installation tool used for what is commonly called a Hendrickson “Wide Beam” suspension.
Used to install Hendrickson S-24691 Tri-Functional bushing kit. Proper alignment of the Tri-Functional bushing is a critical component of the Hendrickson susension. The S-21307 tool makes bushing alignment & replacement a simple procedure.


Feature
1 Part Type:Bushing Installation Tool
2 Bushing Type:Wide Beam Bushing
3 For use with Hendrickson Tri-Functional Wide Beam Bushing Kits
4 Manufacturer Part Number: S21307
5 Bushing Installation Tool for Hendrickson Replace Part # S21307, E9575, TRB5912-T Automann
6 Manufactured following strict OE standards to work like the original component
7 Engineered using the latest technology to ensure the product lasts longer in service
8 With its durable construction and high-quality materials, it is guaranteed to make the installation process a breeze.
9 Engineered with a factory-like design for effortless installation, ensuring a perfect match with your vehicle
10 Made of high-quality components for durability, reliability, and performance
11 Designed specifically for trucks, trailers, and buses
12 Must Use LUBE on Threads of Tool, Thrust Bearing, and Washer Faces
13 Must Also Ensure the Bushing is Well Lubed with Bushing Supplied Lubeance

Cross References:
BWP HE9AA-T
Dayton 334-936
Euclid E-9575
Hendrickson S-21307
Meritor R309575
Sirco SH2034
Tiger Tool 15040

Applications:
Automann TS TRB5912
Dayton TS 334-1576
Euclid TS E-10729A
Flagg TS HT245
Gaff TS 13628
Hendrickson TS S-24691


Removal of Bushing：
1.Scribe the bushing orientation on the beam tube and compression tube.
2.The spring pins are not required to line up with the bushing holes during removal.
3.Tighten retaining nuts to remove slack. Thread on hammer adapter in the event the bushing becomes seized. Hook up hydraulics and begin removal operation.
4.After each 2 inch stroke, re-tighten nuts to take up slack. (Most bushing will require 3-4 adjustments)

Installation of Bushing：

1.Lubricate the bushing and insert the bushing into compression cylinder.
2.Place the plunger on top of the bushing, align the mark on the bushing with the mark on the plunger. The 4 corresponding pins to the bushing type you are installing should seat into the bushing.
3.Tighten retaining nuts to remove slack. Thread on hammer adapter in the event the bushing becomes seized. Confirm the plunger is aligned with the scribed mark on the beam tube and the pins are still engaged in the bushing. Hook up hydraulics and begin installation operation.
4.After each 2 inch stroke, retighten nuts to take up slack. (Most bushing will require 3-4 adjustments)

package: 1 Set of Bushing Installation Tool – Complete Kit ( Includes two small packet of LUBE )