36″ x 36″ Concrete Seamless Stamp Mat Slate Stone Texture

36″ x 36″ Concrete Seamless Stamp Mat Slate Stone Texture Set Decorative Concrete Cement Stamps Mats, Seamless Concrete Texturing Skin Blue

• High Quality Material: The concrete seamless stamp mat is made of high quality PU, which is wear-resistant, shockproof, sturdy and not easily deformed
• Edge Trimmer: It can trim the edges and corners of concrete to make it more beautiful. Meanwhile, the handle of the edge trimmer is ergonomic and comfortable to hold, which can reduce the fatigue of your hands and arms, and provide you with a pleasant experience
• Stylish Exterior: The smooth interior lines and pure bright blue color make it look very attractive and allow you to create a nice textured concrete patio, driveway or pool deck
• Quick Imprinting: This product has a large surface area with feathered edges, so it doesn't require precise placement. You can imprint the concrete quicker, saving you lots of time and energy
• Uniform Floor Pattern: With this seamless concrete slate pattern, your concrete floor will have a uniform shape and pattern, making your floor look more neat and distinctive

Specification

Color: Blue
Material: PU
Style: Modern
Gross Weight: 6kg/13.33lbs
Product Size: About 90*90cm/36*36in

Construction Process of Embossed Floor
1.The formwork erection, paving, vibrating, grouting, and leveling shall be completed according to the construction procedures of pavement concrete.
2.Before the initial setting of the concrete surface, use a large magnesium alloy spatula to smooth the concrete surface.
3.Use special magnesium alloy edge finishing plaster to finish edges and corners as required.
4.Spread the colored reinforcement evenly on the concrete surface two times, the first time spreading 2/3 of the standard amount (3kg/6.6lbs per square meter), and the second time spreading the remaining 1/3.
5.Every time the color reinforcement is sprayed, the magnesium alloy trowel shall be used for leveling and polishing after the color reinforcement is wet so that the color reinforcement can completely cover the concrete surface.
6.After the initial setting of the color strengthening material, when the surface is dry and there is no obvious moisture, evenly sprinkle the coating powder on the surface, and the standard dosage per square meter is 0.15kg/0.33lbs.
7.Press the die alternately and progressively. The die shall be formed once to avoid repeated stamping.
8.Brush the floor surface evenly three days after the completion of the die. A small amount of detergent can be added during cleaning. Cut the expansion joint in time before cleaning.
9.After the floor surface is completely dry, it must be sprayed with color art floor protective agent, the standard dosage is 0.15kg/0.33lbs per square meter. The protective agent can spray with a roller brush or spray barrel.

Package Included

1* Seamless Concrete Slate Pattern
1* Edge Trimmer

Notes

Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.