Tazer Mini Programmer JL JT Calibration Module, Compatible
Tazer Mini Programmer JL JT Calibration Module, Compatible with2018-2024 Jeep Wrangler JL 4XE and Gladiator JT -Change Tire Size, Gear Ratio, TPMS, Over 65 Settings
- High Performance: If you need comprehensive vehicle tuning capabilities, want to boost your vehicle's performance, perform off-road configurations, or need more customization options, this Mini Programmer is a good choice
- Auto Stop Start Disable: If you have a Jeep Wrangler JL or Gladiator JT with Auto StopStart, you may find it annoying and want it to default OFF. Mini Programmer can set the startup drive mode for you, so you don't need to switch modes every time you get in the car
- Enable/Disable TPMS: In addition to enabling or disabling the TPMS system, Mini Programmer also allow users to adjust the pressure threshold for TPMS alarms. This is useful for users who want to operate at different tire pressures. There are also functions to adjust tire size, axle gear ratio, daytime running light mode, etc
- Off-road Mode Setting: Provides a variety of off-road mode options to optimize the vehicle's performance in different terrains. Includes manually control the anti-roll bar, manually control the front and rear axle differential locks at any speed to adapt to various off-road challenges
- Compatible Vehicle: The Mini Programmer is an electronic plugin device for the following vehicles: 2018-2024 Jeep Wrangler JL, 2020-2024 Jeep Gladiator JT, 2021-2024 Jeep Wrangler 4XE. Meets most usage requirements, no update module.
Operating Instruction
1. Power on the vehicle, but do not start the engine
2. Use the up and down keys on the steering wheel to adjust the instrument panel display to the audio interface
3. Long press the left button on the steering wheel and press the CANC button at the same time to see if the module menu appears on the screen
4. If a menu appears, configure it according to the instructions. If there is no menu, check if the car gateway fuse is burned out
CRITICAL ! ! !
Every single time you make changes in the “vehicle settings” (engine off) menu or unmarry, you must perform a full reboot and two sleep cycles. Please follow the instructions carefully to perform a full reboot and two sleep cycles
| SKU: | B0DPWCC3BD |
| Weight: | 3.2 ounces |
| Dimensions: | 1 x 1 x 1 inches |
| Brand: | Tutor Auto |
| Model: | 80009017 |
| Manufacture: | Tutor Auto |
| Origin: | China |
Product Description
Operating Instruction
1. Power on the vehicle, but do not start the engine
2. Use the up and down keys on the steering wheel to adjust the instrument panel display to the audio interface
3. Long press the left button on the steering wheel and press the CANC button at the same time to see if the module menu appears on the screen
4. If a menu appears, configure it according to the instructions. If there is no menu, check if the car gateway fuse is burned out
CRITICAL ! ! !
Every single time you make changes in the “vehicle settings” (engine off) menu or unmarry, you must perform a full reboot and two sleep cycles. Please follow the instructions carefully to perform a full reboot and two sleep cycles